How to Bypass Limp Mode
In general it is not recommended to avoid Limp mode unless you have a good reason to do so and know the consequences. Once the idle mode is activated, the vehicle will experience a number of problems, possibly even causing the vehicle to die if you attempt to continue driving the vehicle using the engine, transmission, and electrical parameters.
These tips are a temporary fix when you get home or to the store, but they won’t fix the root of the problem. Take your vehicle to a local auto repair shop to have the problem diagnosed and fixed to prevent damage to the engine or transmission.
If any of these tips work, you can expect to return to disabled mode quickly if the error persists. Keep this in mind when driving and park yourself on roads that have shoulders or take roads less traveled.
#1 – Restart the Car
Sometimes the zoom mode is triggered by simply turning the car over and restarting.
#2 – Clear the Code
You can clear any codes found using an OBD2 scanner. It’s best to buy a good OBD2 scanner because it pays for itself after one use, but your local auto parts store has one you can borrow. Unfortunately, for liability reasons, they may not be able to disable the code for you.
#3 – Disconnect and Reconnect the Battery
Many vehicles forget that the power light comes on after the battery is disconnected and then reconnected. Just disconnect the bad battery terminal and reconnect it after a few seconds.
When the battery is disconnected, you may need to hold the brake pedal for a short time to ensure that the remaining power in the system is depleted.
